Right Tie Down Straps FOR THE Trucking Business

OK, here we will talk about something familiar to most truckers, ratchet straps, as you can plainly see, there are two words, ratchet and straps, and you guessed right, the ratchet straps are assembly of ratchets and webbing, think about cam buckle straps? yeah, they're cam buckles with straps! Relatively weak, the cam straps are most seen inside box trucks and on passenger cars. Ratchets are another story, the hardware is pretty strong, and because of it's mechanism, the ratchet could be pretty small and fairly large, it is possible to get 1''-4'' ratchets around, and the breaking strength can be as weak as a couple of hundred LBS to as strong as 16,2000 LBS, it's pretty versatile compare to all or any other truck tie downs.

It's estimated that 80% trucks are box trucks, and the e track tie down system is just for semi trailers, so e track straps are most popular cargo straps. And  box truck business  aren't as strong because the one we use on flatbed truck, the working load limit of typical e track straps is 1,000lbs, with minimum breaking strength of 3,000lbs. The working load limit of 2' e track straps are lower than other 2'' truck straps, the reason being the truck wall provides support for the strain and prevent the strain from moving if stacked properly, but you still need to make sure the strain in your truck are secured properly and the way to secure them are appropriate.

According to cargo securement standard, the design factor of ratchet assembly is 3:1, meaning that the breaking strength of the tie down is three times of the working load limit, this means that a relatively forgiving work environment, however the look factor of transport chains is 4:1, which indicates the chains will undoubtedly be better fitted to tough conditions, such as for example very high/low temperature, moisture, while the aforementioned truck straps are just for normal conditions.

The truck straps usually created from polyester, which includes low elongation and less elastic, that is perfect for tie down truck load, since we don't want the load on the cargo area to go or budge. When making tie down straps, manufacturer must follow certain guidelines and pass DOT inspection, this means all the straps made for tie down purpose have to meet all the requirements imposed by FMCSA(Federal Motor Carrier Safety Agency) and follow the guideline of WSTDA and ASTM.